No products in the cart.
The latest Inverex Nitrox 6.6kW Hybrid Solar Inverter price in Pakistan is Rs. 275,000/- updated on August 29, 2026.
Overview:
The Inverex Nitrox 6.6kW Hybrid Solar Inverter (NitroX 6.6KW SP) is built for hybrid homes and small businesses that want strong solar input handling in a mid-size footprint. It accepts up to 10,560W of PV power (rated 10.5kW) across a wide 150–425V DC MPPT range through two independent trackers, with a max. DC input voltage of 500V, reaching a peak efficiency of 97.6%.
Battery support spans 40–60V lead-acid or lithium-ion banks with a 140A max. charge/discharge current — enough to cycle a moderately-sized lithium bank quickly during a cloudy afternoon or a grid outage. Protection is genuinely comprehensive: DC polarity reverse-connection protection, AC output overcurrent and overvoltage protection, thermal protection, DC component monitoring, overvoltage load-drop protection, ground fault current monitoring, an optional arc fault circuit interrupter, power network monitoring, island protection monitoring, earth fault detection, a DC input switch, DC terminal insulation impedance monitoring, and residual current (RCD) detection — on top of Type II DC/AC surge protection.
All of that sits inside an IP65-rated enclosure that stays remarkably quiet, under 30dB, and operates across an unusually wide -40°C to +60°C range (with output derating above 45°C). Communication runs over RS485, RS232 and CAN for BMS and monitoring integration.
Key Features:
- 6.6kW hybrid inverter with 10.5kW / 10,560W max. PV input power
- Wide MPPT range 150–425V DC across 2 independent trackers; max. DC input voltage 500V
- Maximum efficiency of 97.6%
- Battery voltage range 40–60V; max. charge/discharge current 140A
- Compatible with both lead-acid and lithium-ion battery banks
- Comprehensive protection suite: DC reverse polarity, AC over-current/over-voltage, thermal, DC component monitoring, overvoltage load-drop, ground fault current monitoring, island protection, earth fault detection, DC input switch, DC terminal insulation impedance monitoring, residual current (RCD) detection
- Optional arc fault circuit interrupter and power network monitoring
- Type II DC and AC surge protection
- IP65-rated enclosure; noise level below 30dB
- Wide operating temperature range -40°C to +60°C (derating above 45°C)
- RS485/RS232/CAN communication interfaces
- Compact footprint at 340 × 470 × 258mm (excluding connectors/brackets), 17.35kg
Documents:
GENERAL
| Type | Hybrid Solar Inverter |
| Rated Power | 6.6 kW |
ELECTRICAL / PV INPUT
| Max. PV Input Power | 10,560 W (10.5kW rated) |
| MPPT Voltage Range | 150–425 V DC |
| Max. DC Input Voltage | 500 V |
| Number of MPP Trackers | 2 independent |
BATTERY
| Voltage Range | 40–60 V |
| Max. Charge / Discharge Current | 140 A |
| Battery Type | Lead-acid or Lithium-ion |
PERFORMANCE
| Max. Efficiency | 97.6% |
| Noise Level | < 30 dB |
SAFETY
| Protection Suite | DC polarity reverse-connection protection, AC output overcurrent protection, thermal protection, AC output overvoltage protection, AC output short-circuit protection, DC component monitoring, overvoltage load-drop protection, ground fault current monitoring, arc fault circuit interrupter (optional), power network monitoring, island protection monitoring, earth fault detection, DC input switch, DC terminal insulation impedance monitoring, residual current (RCD) detection |
| Surge Protection | Type II (DC), Type II (AC) |
| Ingress Protection | IP65 |
| Operating Temperature | -40°C to +60°C (>45°C derating) |
MECHANICAL
| Dimensions | 340 × 470 × 258 mm (excluding connectors and brackets) |
| Weight | 17.35 kg |
COMMUNICATION
| Interfaces | RS485 / RS232 / CAN |
There are no reviews yet.