Dyness STACK100 Lithium Battery (15.36-76.8kWh)

The latest Dyness STACK100 Lithium Battery (15.36-76.8kWh) price in Pakistan is Rs. 250,000/- updated on August 29, 2026.

STACK100 exists for people who don’t want a rack, don’t want to run internal wiring, and don’t want to wait days for an installation crew. It’s a modular, stackable energy storage platform for residential and commercial & industrial sites alike — a single cluster covers 15.36kWh to 76.8kWh, and up to 12 clusters connected in parallel scale the whole system to 921.6kWh, enough for restaurants, warehouses, and farms that need genuinely serious capacity. The installation story is the real headline: modules physically stack on top of each other with zero internal wiring, and Dyness rates a single cluster install at just 30 minutes. Each module independently supports a 1C charge/discharge rate up to 86.4kW, making STACK100 a genuine fit for grid frequency regulation and EV charging station applications where the economics depend on cheap off-peak charging and expensive peak-hour discharging. Safety runs through a 5-second aerosol fire-suppression system per module, and a redesigned internal cooling duct holds cell temperature variance within 3°C, which Dyness credits with a 20% longer service life compared to earlier designs. It’s confirmed plug-and-play with Solis inverters, and an optional self-heating function keeps the battery above 2°C even when the ambient temperature drops to -20°C.

Key Features:

• Zero Internal Wiring: Modules stack directly with no rack, plug-and-play, ~30 minutes per cluster.
• Built to Scale: Up to 12 clusters in parallel, 15kWh to 921kWh total system capacity.
• Real Frequency-Regulation Power: 1C rate, 86.4kW per module, suited to grid regulation and EV charging.
• 5-Second Fire Response: Intelligent aerosol suppression per module.
• 20% Longer Service Life: Redesigned cooling duct keeps cell temperature variance within 3°C.
• Cold-Climate Ready: Optional self-heating maintains the battery above 2°C at -20°C ambient.
• Confirmed Solis Compatibility: Plug-and-play with Solis inverters (check official list for other brands).
• No Calibration on Standard Installs: Only required after a system expansion, not day-to-day.

Documents:

Dyness STACK100 15.36-76.8kWh Stackable Photovoltaic Storage System (Max 921.6kWh) Datasheet.pdf