, ,

CoreTech NextGen 10KW Single Phase Hybrid Solar Inverter


353,000.00

SOLAR LOAD CALCULATOR

Click & Calculate the right inverter, solar panels, and battery size based on your electricity usage.

The latest CoreTech NextGen 10KW Single Phase Hybrid Solar Inverter price in Pakistan is Rs. 353,000/- updated on August 31, 2026.

Overview:

The CoreTech NextGen 10KW Single Phase Hybrid Solar Inverter (model CT NexGEN 10kW Hybrid-SP / PV20000) is the largest single-phase model in the NexGen range, built for large residential and commercial solar installations. It supports up to 20,000W (20kW) of PV access power with 15,000W usable against its 10kW/11kVA rated output — double the array headroom ratio used across the smaller 6kW and 8kW NexGen models, across 2 MPP trackers and up to 4 strings.

Battery charge/discharge current reaches up to 210A on the same 48V smart battery platform (40–60V range) as the rest of the NexGen family, with sub-4ms UPS-level switching and 2× rated output surge capacity for 10 seconds. AC output current runs up to 47.8A at 220V/230V, and maximum efficiency reaches 97.7% (99.8% MPPT efficiency). Generator integration adds diesel generator auto start/stop control for sites that keep a backup generator on hand.

The rugged outdoor design carries an IP66 rating with smart cooling and a wide -40°C to +60°C operating range, tolerating up to 4,000m altitude with derating above 3,000m. Connectivity covers WiFi, Bluetooth, optional GPRS/LAN and RS485/CAN with app monitoring, remote diagnostics and OTA firmware updates, and CoreTech backs the unit with a 10-year warranty. Your existing confirmed price of Rs. 353,000 sits comfortably within the market range found this session — Rs. 299,500 at one in-stock reseller (Concept Power) to Rs. 400,000 at another (Kamal Solar, out of stock) — so no change is needed there.

Key Features:

  • 10kW rated output power (11kVA max apparent power), single-phase transformerless hybrid inverter
  • 20,000W max PV access power, 15,000W max usable PV input power
  • 2 MPP trackers, up to 4 strings, 90–450V MPPT range, 550V max input voltage, 60V start-up voltage
  • Max PV input current 32A/32A, max short-circuit current 40A/40A
  • 48V battery platform (40–60V range), lead-acid and lithium-ion compatible, auto-adaptive BMS charging
  • Max battery charge/discharge current 210A/210A over CAN/RS485
  • AC output 220V/230V (L/N/PE), 160–300V range, 50/60Hz ±5Hz, up to 47.8A max current
  • Power factor >0.99, THDi <3%
  • Backup switching <4ms, 2× rated surge for 10 seconds
  • Up to 97.7% max efficiency, 99.8% MPPT efficiency, 96.7% EU efficiency
  • Full protection suite: DC switch, reverse polarity, insulation monitoring, leakage current, ground fault, short circuit, anti-islanding, Type II DC/AC surge, optional AFCI, I-V curve scanning
  • Parallel operation up to 16 units; grid-tied, off-grid and AC-coupled support
  • Diesel generator auto start/stop control
  • IP66-rated, smart fan cooling, -40°C to +60°C, up to 4,000m altitude (derating above 3,000m)
  • WiFi, Bluetooth, optional GPRS/LAN, RS485/CAN for BMS; remote diagnostics and OTA updates
  • Dimensions 350 × 620 × 260mm, 28kg; LCD + LED display
  • 10-year warranty
Documents:

CoreTech NextGen 10KW Single Phase Hybrid Solar Inverter Data Sheet.pdf

GENERAL

Model / SKUCT NexGEN 10kW Hybrid-SP (PV20000) / CT-INV-5
TypeLow Voltage Hybrid Inverter, Single Phase, Transformerless
Rated Output Power10 kW
Max. Apparent Power11 kVA
Warranty10 years

ELECTRICAL / PV INPUT

Max. PV Access Power20,000 W
Max. Usable PV Input Power15,000 W
Max. Input Voltage550 V
Rated PV Voltage360 V
Start-up Voltage60 V
MPPT Voltage Range90–450 V
Max. PV Input Current32A / 32A
Max. Short-Circuit Current40A / 40A
MPPT Trackers / Max. Strings2 / 4

BATTERY

Battery TypeLithium-ion / Lead-acid
Rated Voltage / Range48 V / 40–60 V
Max. Charge / Discharge Current210A / 210A
CommunicationCAN / RS485, auto-adaptive BMS charging

AC OUTPUT

Rated Output Power10 kW
Max. Output Current47.8 A
Rated Voltage220V / 230V (L/N/PE)
Voltage Range160–300 V
Frequency50/60 Hz (±5Hz)
Power Factor>0.99 (0.8 lead to 0.8 lag)
THDi<3%

AC INPUT

Rated / Max. Input Power10 kW / 11.5 kW
Max. Input Current50 A

BACKUP (UPS) OUTPUT

Rated Power / Peak Power10 kW / 2× rated for 10s
Switching Time<4 ms
THDv<3%

PERFORMANCE

Max. Efficiency97.7%
MPPT Efficiency99.8%
EU Efficiency96.7%
Battery Charge / Discharge Efficiency95.3% / 93.9%

SAFETY

ProtectionDC switch, reverse polarity, insulation monitoring, residual leakage detection, ground fault, short circuit, anti-islanding, I-V curve scanning
Surge ProtectionDC Type II / AC Type II
Optional ProtectionAFCI
Ingress ProtectionIP66
Operating Temperature-40°C to +60°C
Max. Altitude4,000 m (derating above 3,000m)
Humidity0–100%

MECHANICAL

Dimensions (W × H × D)350 × 620 × 260 mm
Weight28 kg
CoolingSmart fan cooling
Night Consumption≤20 W

COMMUNICATION

DisplayLCD + LED
ConnectivityWiFi, Bluetooth; optional GPRS/LAN
Generator IntegrationDiesel generator auto start/stop
Parallel OperationUp to 16 units; grid-tied, off-grid, AC-coupled
CertificationsIEC 61727/62116/61683, IEC/EN 62109-1/2, IEC/EN 62477-1, EN IEC 61000-6 series

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “CoreTech NextGen 10KW Single Phase Hybrid Solar Inverter”

There are no reviews yet.

wpChatIcon
    wpChatIcon

    Select at least 2 products
    to compare