, , ,

Dyness DL2.5 2.56kWh IP20 Lithium Battery 25.6V 100Ah


135,000.00

The latest Dyness DL2.5 2.56kWh IP20 Lithium Battery 25.6V 100Ah price in Pakistan is Rs. 135,000/- updated on August 31, 2026.

Home batteries usually force a choice between starting small and planning for growth — DL2.5 removes that trade-off. Each LiFePO₄ module holds a modest 2.56kWh across 8 series-connected 3.2V/100Ah cells, but the real strength of DL2.5 is how it scales: up to 16 units run in parallel, taking a household from a 2.56kWh starting point to a substantial 40.96kWh system without changing platforms or replacing hardware. It supports a 90% depth of discharge, and while the recommended discharge current is 50A, it can push to 130A for bursts up to 30 minutes, comfortably supplying several loads at once rather than struggling under a single heavy appliance. Charging follows the same pattern — 50A recommended, up to 75A for 40-minute stretches when the system needs to top up faster. Dyness backs the module with genuine engineering safeguards, including CAN, RS485, and optional WiFi communication for inverter compatibility and remote visibility, and a battery equalization system clever enough to let a fully depleted module sit safely in parallel with a fully charged one, something many budget batteries can’t do without degrading the pack.

Key Features:

  • Scales From One Module to Sixteen: 2.56kWh per unit, growing to 40.96kWh across 16 parallel modules.
  • Real Multi-Load Discharge: 50A recommended, up to 130A for 30-minute bursts, for multiple loads running at once.
  • Fast-Charging Capable: 50A recommended charge current, up to 75A for 40-minute stretches.
  • Space-Efficient Footprint: Compact 481×221×133mm frame, easier to fit in tight utility rooms.
  • Tolerates Mixed Charge States: Equalization system allows 0%–100% charge modules in the same parallel bank.
  • Wide Communication Support: CAN, RS485, and optional WiFi for broad inverter and monitoring compatibility.
  • LiFePO₄ Cell Chemistry: Chosen specifically for thermal stability over cheaper lithium alternatives.

Documents:

Dyness 25.6V 100Ah DL2.5 Lithium Battery Datasheet.pdf

GENERAL

Product ModelDL2.5
Cell TechnologyLi-ion (LFP)
Cell Configuration8 cells in series, 3.2V / 100Ah per cell

ELECTRICAL

Nominal Capacity2.56 kWh (100Ah)
Nominal Voltage25.6V
Module Charge Voltage28.5Vdc
Depth of Discharge (DOD)90%

CHARGE & DISCHARGE

Recommended Discharge Current50A
Max Discharge Current130A (max 30 minutes)
Recommended Charge Current50A
Max Charge Current75A (max 40 minutes)

CYCLE LIFE & DURABILITY

Cycle Life≥6,000 cycles

SAFETY

Short-Circuit ProtectionLockout on detection
Surge ProtectionBuilt-in resistance
Pollution DegreeII
Charge-State ToleranceSupports mixed 0%–100% modules in parallel without pack degradation

COMMUNICATION & MONITORING

CommunicationCAN / RS485 / WiFi (optional)
Remote ControlSupported
Firmware UpdatesOTA (over-the-air)

MECHANICAL & ENVIRONMENTAL

Net Weight23 kg
Dimensions (W×D×H)481 × 221 × 133 mm
Ingress ProtectionIP20 (indoor use)
Working TemperatureCharging 0°C ~ +55°C / Discharging -20°C ~ +55°C
Storage Temperature-10°C ~ +35°C
Humidity5% ~ 85% RH, non-condensing

SYSTEM EXPANSION

Max Parallel Units16
Max System Capacity40.96 kWh

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Dyness DL2.5 2.56kWh IP20 Lithium Battery 25.6V 100Ah”

There are no reviews yet.

wpChatIcon
    wpChatIcon

    Select at least 2 products
    to compare